Menu
Just $0.23 per quart (32oz)!
When diluted
PRODUCT INFORMATION
Dr. KlarX™ BioDissolve is a versatile water-based enzyme heavy-duty cleaner that is designed to replace high pH cleaners. It can be diluted and used as a daily cleaner-degreaser and is highly effective at removing mold, mildew, stubborn soils and deep stains. It is bio-degradable, non-flammable, VOC-compliant, and water-soluble. It can be used on any water-friendly hard surfaces like concrete masonry, tiles, fiberglass, plastic, and stone surfaces. It goes to work immediately – absorbs, emulsifies, and floats soil to the surface.
The NewEraSOS™ difference: we use nanotechnology in our eco-friendly cleaners to improve the surface-active ingredients (Surfactants) at the sub-micron level with safer natural minerals to eliminate harsher, dangerous traditional caustic chemicals. Nano surfactants drive cleaning agents deeper and faster into soil for a more complete deep cleaning. This helps eliminate volatile organic compounds (VOCs) and residue build-up and improves safety profiles.
Once a surface is properly cleaned and then sealed with one of our NewEraSeal™ Sealers, like Fortify, Finest, Stayz, or Wonder Walk, cleaning is usually reduced to only wiping with water and a microfiber cloth or paper towel.
REMOVES
ADVANTAGES
DEEP CLEANS: Containing special high CFU micro-encapsulated enzymes to degrade and solubilize mold, mildew, stubborn soils and stains safely.
CONSUMES ODORS: Powerful enzymes absorb offensive restroom and kitchen odors.
WATER SOLUBLE: Powerful – mixes with water for fast, safe, economical cleaning action.
VOC FREE: Odor-free and helps eliminate bath and kitchen odors.
100% FIREPROOF: Will not burn or support combustion. It does not emit dangerous toxic fumes – use safely inside or outside.
SAFE ON METAL SURFACES: Contains a special rust inhibitor. Safely and effectively cleans all metal, concrete, rubber, and plastic surfaces.
EASY TO USE: May be sprayed, wiped, or mopped on metals, plastic, rubber, composites, and concrete.
ECONOMICAL: Range of dilutions for dependable cleaning power. It helps prolong the life of surfaces and equipment.
NON-TOXIC: Contains no carbon tetrachloride, naphtha, benzene, kerosene, gasoline, or other hazardous solvents that produce toxic fumes.
VERSATILE CLEANER: It may be used as a daily cleaner, degreaser, mold/mildew remover and as a stripper for removing old wax.
RUST PREVENTION: It contains special rust inhibitors for cleaning metal surfaces.
USE INSTRUCTIONS
Use Dr. KlarX™ BioDissolve instead of petroleum solvents or caustic cleaners on tough grease, deep stains, mold, mildew, carbon, wax build-up, pet or urine stains, and odor-causing organic soils.
GENERAL CLEANING: Spray, wipe, or mop on the surface. Let sit on the surface to dissolve soils. Wipe the surface and rinse with clean water as needed. Remove stubborn spots with a non-abrasive pad.
FLOOR WAX: Spray, wipe, or mop on the surface and allow time to solubilize wax. Use a rotary stripper pad and collect residue with a wet vacuum.
STAIN REMOVAL: Spray, wipe, or mop on the stain/spot affected areas. Wait 15 to 30 seconds, gently scrub the stain/spot with a soft nylon brush, then rinse. If the stain/spot remains, adjust dilution and repeat the above steps until the stain/spot is removed.
FOR EXTERIOR CLEANING:
Recommended Dilution Ratios:
Light Buildup: ½oz per quart (32oz)
Moderate Buildup: 1oz per quart (32oz)
Heavy Buildup: 1 ½ oz per quart (32oz)
Severe Buildup: As Needed
SAFETY
As with all cleaning and sealing products, use protective wear, rubber gloves, and goggles to avoid skin and eye irritation.
Each order of BioDissolve™ comes with a 5-gallon pail.
To learn more about these and any other products, other sizes, and discounts for bulk orders, please contact us at 888.637.6760 ext. 165.
| Weight | 18.3 lbs |
|---|---|
| Dimensions | 12 × 12 × 20 in |