Product Info

NewEraSeal™ Fortress Kote is a low VOC epoxy coating that provides excellent corrosion, chemical and abrasion resistance verified by several ASTM tests.  It is a fast curing nano cycloaliphatic amine (NCA) epoxy coating that integrates with a surface to create an extreme bond.  NewEraSeal™ Fortress Kote can be applied with a brush or roller for smaller areas and an air or airless spray gun for larger surfaces.

Where to Use

Any exposed metal or concrete surface including:

• Brine Water and Water Storage Tanks (Interior/Exterior)
• Metal Roofs and all other metal surfaces
• Concrete Floors, Walls, Ceilings (Interior/Exterior)
• Plywood
• Metal Supply Pipes (above and below ground)
• Moisture Barrier for Roof Decks
• Automotive Undercarriage for Trucks and Trailers
• Parking Decks
• Garage Floors
• Storage Buildings/Warehouse

Agriculture and Farming

• Agriculture Chemical Handling and Storage Equipment
• Farming Equipment
• Hog Confinement and Animal Manure Storage and Handling Equipment

Marine

• Marine Terminal Structures and Equipment
• Aluminum, Steel or Fiberglas Boat Hulls, and Superstructure
• Marker buoys
• Dock decks
• Dock bollards

Water/Wastewater Treatment

• Concrete and Galvanized Underground Sewage and Water Pipes
• Holding Tanks (clarifiers, digesters,
• Water and sewage piping (above and below ground)
• Pump Stations / Utility Rooms

Industrial

• Cell Phone Towers
• Antennae Towers
• Fuel Storage Tanks (above and below ground)
• Storage Silos
• Grain and Salt Storage Silos – (Metal and Concrete)
• Oil Drilling Rigs On & Offshore
• Oil Platforms
• Mining and Fracking Water Storage and Handling Equipment
• Railroad and Shipyard
• Pump Stations
• Receiving Docks
• Transport Piping
• Steel Pilings

Benefits

• Coating is self-priming
• Unmatched flexural strength and abrasion resistance
• Fast cure time
  (see Use Instructions Document)
• Will not off gas VOC’s or leach any component into water
• Odor reduction

Confirmed Testing

MIL-PRF-4556F – Fuel Tank Paint Performance Requirement: Pass
MIL-DTL-24441D – Ship Paint Performance Requirement: Pass
ASTM D 4060 – Abrasion
ASTM D 4541 – Pull Off Strength (1,735 psi)
ASTM G 8 – Cathodic Disbondment
NACE TM-01-74 – Chemical Immersion
ASTM D 870 – Water Resistance
ASTM B 117 – Salt Fog Spray Method for Corrosion Resistance (1,000-hour test)

Chemical Resistance Range

Aliphatic Hydrocarbons
Ammonium Hydroxide 10%
Aviation Gas 100/130
Boric Acid 5%
Ethanol 190 to 240
Sulfuric Acid – 20% solution
Liquid Fertilizers
Hydrogen Peroxide 3 to 5%
Isopropanol
Potassium Hydroxide up to 40%
Sodium Hydroxide up to 50%
Toluene
Xylene
Brine water 180,000 ppm
Dry Fertilizers

Storage and Packaging

Colors Available: Beige, Gray, Black, White.  Special colors are available.
Finish:  Semi-Gloss
Store between 20° F and 110° F
Net weight per gallon: 13.10 ± 0.25 lbs. (Will vary slightly between colors)
Shelf Life: 24 months at recommended storage temperature
Two Packaging Components: Part A (Amine) and Part B (Epoxy)